9159金沙申请大厅(中国)有限公司-BinG百科

Job requirements:
1.Full-time college undergraduate or above, English level 4 or above ; 
2.electronic information, computer, automation, communication related professional ; 
3.Skilled use of OpenCV or similar visual algorithm library, familiar with commonly used machine vision algorithms ; 
4.Familiar with C / C + + programming language, have a good object-oriented programming ideas ; 
5.Familiarize yourself with one of the following models: yolo、Faster R-CNN、Mask R-CNN、AlexNet、VGGNet、GoogLeNet、ResNet、DenseNet、MobileNet和ShuffleNet、SSD；
6.Proficient in matlab for algorithm verification is preferred. 

Job responsibilities:
1.Responsible for machine vision application function development;
2.Responsible for demand analysis, collation and program design;
3.Responsible for analyzing and solving product problems.

Job requirements:
1. Bachelor's degree or above, with a certificate of English proficiency level 4 or above;
2. Majors related to electronic information engineering, electronic technology, computer science, automation, and communication;
3. Familiar with C/C++programming language and have good object-oriented programming ideas;
4. Have a solid theoretical foundation in electronic technology, proficient in digital and analog circuit knowledge, and familiar with the performance principles of commonly used electronic components;
5. Have experience in STM32 development;
6. Familiarity with TCP/IP, CANopen, and MODBUS is preferred;
7. Familiar with ARM Cortex-A9 or DSP or FPGA is preferred;
8. Familiar with Linux applications or drivers is preferred as a developer.

Job Responsibilities:
1. Responsible for embedded hardware and software design;
Responsible for research and product development of RTOS and open-source Linux operating system drivers;
Responsible for debugging, upgrading, and maintaining embedded systems.

Job requirements:
1. Master's degree or above, with a certificate of English proficiency level 6 or above;
2. Mathematics, computer science, electronic information, physics, automation and other majors are preferred;
3. C++programming experience is preferred;
4. Experience in developing CNC motion controllers is preferred.

Job Responsibilities:
1. Conduct pre research on core technologies in product development;
2. Quantify and model the problems encountered;
3. Build algorithm models and conduct simulation testing;
4. Develop relevant algorithm libraries.

Job requirements:
1. Bachelor's degree or above, with a certificate of English proficiency level 4 or above;
2. Majors in computer science, statistics, data science, and related fields;
3. Familiar with big data technology stacks, including Hadoop, Spark, Kafka, Flink, etc;
4. Familiar with SQL and at least one programming language, such as Java, Scala, Python, etc;
5. Possess a solid foundation in mathematics and statistics, familiar with commonly used data mining algorithms, and able to apply statistical methods for data analysis.

Job Responsibilities:
1. Responsible for AI project business research, scheme design, data exploration, model building and optimization, and completing the implementation of AI projects;
2. Responsible for processing and analyzing large-scale datasets, extracting valuable information and insights;
3. Responsible for writing technical documents and reports, clearly presenting data analysis results and recommendations.

Job requirements:
1. Bachelor's degree or above, with a certificate of English proficiency level 4 or above;
2. Majors related to electronic information, computer science, automation, and communication;
3. Proficient in using OpenCV or similar visual algorithm libraries, familiar with commonly used machine vision algorithms;
4. Familiar with C/C++programming language and have good object-oriented programming ideas;
5. Proficiency in MATLAB for algorithm validation is preferred.

Job Responsibilities:
1. Responsible for the development of machine vision application functions;
2. Responsible for requirement analysis, organization, and scheme design;
3. Responsible for analyzing and resolving product issues.

Job requirements:
1. College diploma or above;
2. Mechanical design, electrical control, and automation related majors;
3. More than two years of industry experience, including but not limited to CNC systems, lasers, etc;
4. Ability to independently develop and maintain customers, with priority given to those with vehicles;
5. Strong communication skills and a strong sense of competition;
6. Proactive and able to handle pressure, able to adapt to business trips.

Job Responsibilities:
1. Responsible for market development in Shandong, Hebei or East China regions, maintaining relationships with new and old customers, and achieving annual sales targets;
2. Responsible for collaborating with the company's product strategy, identifying segmented industries, and developing corresponding sales strategies;
3. Collect industry information based on market demand to provide a basis for the company's sales strategy;
4. Cooperate with business personnel to promote product pre-sales technology.

Job requirements:
1. College diploma or above;
Majors related to mechanical automation, numerical control technology, mechatronics integration, etc;
Familiar with laser cutting technology and laser cutting nesting software is preferred;
Familiar with computer software and hardware, CNC programming, PLC programming, and debugging process of CNC machine tools;
Having good communication and coordination skills, self motivation, and resilience, good at summarizing, and full of motivation;
Able to adapt to a certain degree of business travel and suitable for long-term residency in Zhangjiagang and Changzhou offices.

Job Responsibilities:
1. Cooperate with business personnel to promote product pre-sales technology;
2. Responsible for providing technical guidance and remote support to customer engineering personnel;
3. Responsible for installing, debugging, training, and providing after-sales service for customers' CNC systems.
 

Job requirements:
1. Bachelor's degree or above, majoring in science and engineering;
2. Possess basic programming skills, language not limited;
3. Have a strong interest in software testing work, adept at identifying, analyzing, and locating problems;
4. Good communication and abstraction skills, meticulous and serious work, strong sense of responsibility;
5. Possess strong driving ability and coordinate various parties to solve problems.

Job Responsibilities:
1. Participate in requirement analysis and solution design, develop testing plans and schedules, and ensure product quality;
2. Set up a testing environment, write test cases, perform black box, white box, unit, integration, system, and acceptance testing, and submit test reports;
3. Analyze and locate problems in the project cycle, and seek solutions;
4. Report and track testing issues, and provide timely feedback on testing results;
5. Communicate with the market, pay attention to customer feedback, and continuously improve project quality.

Job requirements:
1. Bachelor's degree or above, with a certificate of English proficiency level 4 or above;
2. Mechanical design, manufacturing and automation, mechanical electronics, mechatronics and related majors;
3. Familiar with mechanical principles and design, CNC technology, machine tool electrical and PLC programming knowledge;
4. Strong hands-on ability, diligent in thinking, and experience in using mainstream CNC systems are preferred.

Job Responsibilities:
1. Development of application functions for laser cutting/welding industry;
2. Conduct industry research on laser cutting, MES, and CAM, and compile requirements:
3. Maintenance and upgrade of existing industry control solutions;
4. R&D project/new product assistance.

Job requirements:
Bachelor's degree or above, majoring in mechanical engineering, materials science or related fields, with solid abilities in mechanical structure design and optimization;
2. Have experience in designing machined parts and sheet metal parts, familiar with the characteristics of commonly used hardware materials and related processing techniques and assembly processes;
3. Familiar with plastic part design, understand the properties and molding process of plastic materials:
4. Proficient in using design software such as CAD and Creo, able to independently complete product structure design and optimization: possessing the ability to write patent disclosure documents;
5. Have a keen insight into new technologies and processes, and be able to continuously improve product design and production efficiency;
6. Good communication skills and teamwork spirit, able to effectively collaborate with cross departmental teams and promote the smooth progress of projects;
7. Possess strong problem-solving skills, able to handle complex design challenges and unexpected problems;
8. Passionate about mechanical structure design and innovative.

Job Responsibilities:
1. Responsible for the structural design of new project products, completing 3D modeling, 2D engineering drawing, promoting sample testing, improvement, and small-scale production conversion;
2. Responsible for maintaining and upgrading existing products, continuously optimizing product performance;
3. Proficient in using PLM system to complete material coding application, BOM creation and archiving work;
4. Follow up and guide on-site during the trial production phase to ensure smooth and efficient production processes:
5. Analyze production feedback issues, propose improvement measures, and enhance product quality;
6. Based on market feedback, iteratively update product design to enhance product stability and competitiveness.

Job requirements:
1. Bachelor's degree or above, majoring in computer science, electronics, mechanical engineering, industrial engineering, or related fields;
More than 2.5 years of experience in hardware circuit product design, with knowledge of product reliability and stability design;
3. Master the integrity of the entire system and signals EMC、 Knowledge of safety regulations, protectiveness, testability, etc;
4. Familiar with the reliability design theory and reliability testing standards and specifications of electronic products;
5. Strong logical thinking ability, learning ability, and communication skills, with a strong sense of responsibility;
6. Experience in reliability design of CNC products, industrial control, and power electronic products is preferred.

Job Responsibilities:
1. Establish reliability technical process standards and testing specifications for company products;
2. Responsible for proposing and continuously optimizing the system's overall principles, circuit principles, signal integrity, etc. in the early stages of product development EMC、 Reliability design schemes such as safety regulations, protectiveness, and testability ensure reliability assessment and rectification during the product development process; Responsible for the design, experimental verification, and establishment of circuit libraries for basic hardware circuit modules, providing support to the product development department;
3. Responsible for the reliability risk assessment and problem-solving of the company's product, component, and device selection;
4. Responsible for developing and following up on reliability testing plans for the company's CNC systems, motion control boards, and other products;
5. Responsible for conducting failure analysis and localization of testing or market reliability issues, and assisting relevant product departments in resolving them.